MV Color Channel Mixer DirectShow Filter
The MontiVision Color Channel Mixer allows to mix the three
imput color channels from an RGB image to a new outpout color
channels. Additional its support grayscale conversion.
| File: |
ColorChannelMixer.ax |
| CLSID: |
CLSID_MVColorChannelMixer |
Supported Interfaces
IMVColorChannelMixer
IMVHistogram
IMVHistogram2
IMVHistogram3
IMVRegionOfInterest
IMVFilterData
IMVAbout
IMVFilterInfo
Supported COM Events
The filter supports following events through the IMVFilterEvents interface.
Look at the filter events
page for more information.
| Event
|
Value
|
Description
|
| MV_ALGORITHM_START_EVENT |
0
|
A filter starts processing a video frame or sample. |
| MV_ALGORITHM_END_EVENT |
1
|
A filter finishes processing a video frame or sample. |
MV Color Channel Mixer Property Page
Uses the IMVColorChannelMixer interface
to setup the filter.
| Gray Image Out |
Enables the grayscale conversion with the color values from the
first three sliders. |
| Red/Grey Output |
This sliders sets the factors from the input
red/green/blue input color values for the red output
channel. In the grayscale mode alle three output channels contains
the same value. |
| Green Output |
This sliders sets the factors from the input
red/green/blue input color values for the green
output channel. |
| Blue Output |
This sliders sets the factors from the input
red/green/blue input color values for the blue
output channel. |
|