|
Server Address |
The server PC name or his IP address. The
filter receives only data from this server. |
| Check
Server |
Sends a "Ping" to the server pc. Use this to check the
network path to the server. |
| Port
Number |
Destination IP port number for the data stream. The
filter receives all data from this port. |
|
Protocol |
Select the used transport protocol. Only UDP
protocol is currently available. |
|
Description |
It contains the description text from the MV
Network renderer. Use the description field
to identify your stream. The Fiter receives this
text with the mediatype information pakets. |
| Status |
- Recveive Nothing (red): The filter receives
no data through
- Recveive Mediatype Info (yellow): The
filter receives mediatype information data packets. The
MV Network Source filter need this information to connect his
output pin with other filters.
- Recveive Stream Data (green): The
filter receives stream data from the server and pushes it
through his output pin.
|
| Use
En-/Decryption |
Enables dercyption for the ceceived network data. |
| Algorithm |
Choose the decryption algorithm.
Currently available: Blowfish, AES and TEA |
| Keylength |
Sets the used keylength. |
|
Mode |
Sets the decryptione mode.
Currently available: CBC, ECB and CFB
|
| Padding |
Sets the padding mode.
Currently availbale: Padding with zero data, padding with blanks
and PKCS #11 padding. |
| Use Keyfile |
The filter use a keyfile. |
| Enter Key |
The filter uses the enterd key. |
| Key |
Contains the key or keyfile path. |
| Generate Keyfile |
Opens a file dialog to enter a keyfile name and creates a new
key and saves it into the file. |
| Gernerate Key |
Creates a new key. |