MV Monadic Logic DirectShow Filter
The MontiVision Monadic Arithmetic filter is used to modify
the pixel channels of the current frame being processed, using a a
logical operation. A scalar is specified that is applied to the
image.
| File: |
monlogic.ax |
| CLSID: |
CLSID_MVMonLogic |
Supported Interfaces
IMVMonLogic
IMVHistogram
IMVHistogram2
IMVHistogram3
IMVRegionOfInterest
IMVFilterData
IMVAbout
IMVFilterInfo
Supported COM Events
The filter supports following events through the IMVFilterEvents interface.
Look at the filter events page
for more information.
| Event
|
Value
|
Description
|
| MV_ALGORITHM_START_EVENT |
0
|
A filter starts processing a video frame or sample. |
| MV_ALGORITHM_END_EVENT |
1
|
A filter finishes processing a video frame or sample. |
Supported I/O Pins
| I/O Pin
|
Corresponding method
|
Discription
|
Scalar In
[Byte] |
IMVMonLogic::put_Value |
Sets the scalar. |
Attention:
I/O Pins are dominat, what means that they have a higher
priority than the corresponding method of the filters
interface!
MV Monadic Logic Property Page
Implements the IMVMonLogic configuration interface.
| Monadic
Logic |
Used to specify the logic method and the applied scalar. |
| Not |
Calculates the inverse image. Doesn't use the scalar. |
|