The MV Camera Calibration filter is used to create a MontiVision
Camera parameter file (*.mvc). The MV Camera Undistortion filter
uses this file to create a calibrated video stream.
| Camera - Label |
A friendly name for the camera. |
| Camera - Type |
The camera type. |
| Camera - Chip Width |
The width of the camera chip in mm. |
| Camera - Chip Height |
The height of the camera chip in mm. |
| Objective - Label |
A name for the objective. |
| Objective - Focal Length |
The focal length from the objective. |
| Intrinsics |
The camera parameter (intrinsics) |
| Copy Input Image |
Copy the input imges to the output video stream. |
| Undistortion |
Enable the undistortion function from the filter. |
| Reset |
Set the camera parameter (intrinsics) to default values. |
| Load |
Load a camera parameter file (*.mvc). |
| Save |
SSave the camera parameter into a file (*.mvc) |
| Enable Auto Calibration |
Enable the auto calibration function from the filter. |
| Calibration Pattern |
Select the used calibration pattern. |
| Pattern Dimension |
Size of the calibration pattern. |
| Image Count |
Count of used calibration images form calculation camera
parameter. |
| Image Delay |
Minimum delay between two calibration images. |
| Start |
Start the automatic calibration function. |
| Stop |
Stop the automatic calibration function. |
| Get Image |
Save a calibration image in the single shot mode. |
| Single Shot |
Enables the single shot function. To get an calibration
image press the Get Image button. |
| Adv. Segmentation |
Enables an advanced segmentation algorithm to get better
resulst in some cases. |
| Valid Refernece Images |
Count of current valid calibration images saved for
calculating camera parameter. |
| Camera Parameter |
Current used camera parameter. |
| Save Calibration Images |
Save the calibration images into the selected folder. |